765267

Ateq VT520 Manual

43
Zoom out
Zoom in
Previous page
1/68
Next page
Chapter 4 – Functions of the instrument
UM-27200G-U User manual ATEQ VT520 Page 33/56
2.1.2. Adjusting the additional function settings
9 Place the key in the ACCESS position.
9 Create a new program (please refer to chapter 3 paragraph 2 "Creation of a test
program").
9 In the parameters list for this new program, confirm the FUNCTIONS parameter
(refer to chapter 3 paragraph 2.3 "Parameter settings").
Only the functions which have been activated using the above method will
appear in the FUNCTIONS parameter.
2.1.3. List of additional functions
2.1.3. 1) Name
This function is used to customize a program, for example to name a program after the
part to be tested.
)Select the option and enter settings if necessary.
2.1.3. 2) Pressure
This function is used to display and test the pressure parameter sent by the sensor
(internal wheel pressure) so this parameter had to be between the high and low
pressure parameters.
)Select the option and enter settings if necessary.
2.1.3. 3) Temperature
This function is used to display and test the temperature parameter sent by the sensor
(internal wheel temperature) so this parameter had to be between the high and low
temperature parameters.
)Select the option and enter settings if necessary.
2.1.3. 4) Acceleration
This function is used to display and test the acceleration parameter sent by the sensor
(wheel acceleration) so this parameter had to be between the high and low acceleration
parameters.
)Select the option and enter settings if necessary.
2.1.3. 5) Discard ID
This function is used to forget the last reed ID in case of, for a new test cycle, this ID is
detected.
)Select the option and enter settings if necessary.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ateq VT520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ateq VT520 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info