765267
30
Zoom out
Zoom in
Previous page
1/68
Next page
Chapter 3 – Start-up and settings
UM-27200G-U User manual ATEQ VT520 Page 20/56
2.3.1. Valve type
Set the type of sensor the instrument is going to test.
The different sensor types depend of the manufacturer.
)Set this parameter using the method described in § 2.3.
2.3.2. Learn mode (Trigger activation)
Each sensor has different mode or status. Set the test mode.
The different trigger types are in function of the sensor depending of the manufacturer.
)Set this parameter using the method described in § 2.3.
2.3.3. Frequency
Set the receiving frequency among: 315 MHz, 433.92 MHz and 434.42 MHz.
)Set this parameter using the method described in § 2.3.
2.3.4. Time out
Time allow to the sensor to answer. Over this time, if the device has not receiving any
frame, the message "NO RESPONSE" is displayed.
)Set this parameter using the method described in § 2.3.
2.3.5. Power
Set the emitting power. All sensors don’t have the same sensitivity so the emitting
power can be adjust. The power can also be adjust in order to limit the emission range
of the instrument. Adjustment: 0 % to 100 %, step 1 %.
)Set this parameter using the method described in § 2.3.
2.3.6. LF output
This mode selects one or several transmitting antennas and her transmitting mode. The
various modes are: A + B the two antennas are transmitting together, A or B antenna
only, A<>B antennas A and B alternatively (the A1, A2, B1 et B2 modes are not
available in this version.
The transmitting power is modulated by the H letter: example A + B : H. "H" = full power
and "h" half power.
The power is adjusted in the "Power" parameter.
Example: if the configured power is 60% then, if "H" is selected we will transmit with
60% power else, if "h" is selected we will have 30% power.
)Set this parameter using the method described in § 2.3.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ateq VT520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ateq VT520 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info