how to use your oven
programming the cooking
To start right away
1. Set the chosen cooking mode and possibly adjust the tem-
perature.
For example: position: = "traditional pulsed".
Temperature 210ºC.
2. Turn the programme selector to the "cooking time" position.
The cooking time will start flashing at 0:00 to show that
adjustment is now possible.
3. Turn the "adjustment" knob in the + or - direction to set the
required time.
For example: 25 minutes cooking time. The set time is auto-
matically recorded after a few seconds, , ->the display stops
The time immediately begins counting down after adjustment.
réglage.
The cooking end time (start time + cooking time) is automati-
cally displayed.
In this example: cooking end time at 12:55.
After these three steps, the oven starts heating up:
- These levels on the temperature indicator enable you to see
the temperature rising inside the oven.
- You'll hear three beeps when the set temperature is reached.
When cooking has finished, a series of beeps will sound for a
few minutes.
You can stop these beeps by turning the function selector to
"0".
With a delayed start (for a chosen cooking end
time).
Proceed as you would for a programmed cooking session
and then, after adjusting the cooking time turn the program-
me selector to the "cooking end time" position.
The cooking end time will start flashing to show that adjustment
is now possible.
Turn the "adjustment" knob in the + or - direction to set the
desired cooking end time.
Example: cooking ends at 13:00.
Following these steps, the heating of the oven will be delayed
to ensure that cooking finishes at
13:00
.
When your cooking session is finished, in both of the previous
cases you should turn the programme selector to "ºC" and the
function selector to 0.
87
