74651

ATAG ZX 3011 C Manual

61
Zoom out
Zoom in
Previous page
1/66
Next page
GB 61
how to clean by pyrolysis
How to use the pyrolysis program
Remove any accessories from the oven and wipe off any excess grime.
Check that the programmer displays normal time and that it is not flashing.
Press the program selection touch control until the "pyrolysis" pro-
gram appears.
Your oven displays the pyrolysis symbol that correspond to 1 two-hour
pyro. (non-adjustable).
You can select the two other cycles 1h45, or 1h30 non-adjustable, by
pressing the
-
or +
.
The oven cannot be used for 2h, 2h 15 or 2h 30. These times allow for
cooling down until the door is automatically unlocked.
Press the START/STOP touch control.
- The door is locked during pyrolysing (after about 2 minutes).
- You can consult the finishing time for the pyrolysis cycle by
pressing touch control . At the end of pyrolysing the symbol
remains lit until the door is automatically unlocked.
Stop the oven by pressing the START/STOP touch control.
Use a damp cloth for removing the white ash after the oven has cooled
down.
The oven is now ready for use.
Note: The pyrolysing temperature cannot be altered. During the cleaning
cycle the light is switched off. If your oven is still
not clean after pyrolysing you have delayed cleaning too long. Repeat the
pyrolysis program.
IMPORTANT :
Do not hang any cloths or towels on the oven door handle.
During the pyrolysis cycle, the front of the oven gets hotter than
during normal cooking.
Keep young children away.
How to program your pyrolysis to start
when you want
Follow the instructions given in the section entitled "How to use the pyrolysis
program", then:
Press touch control , the finishing time for the pyrolysis
program flashes and the symbol also flashes to show that this time can
be modified.
Set the time the program is due to finish by pressing the
+ or - touch controls..
example
: End of the pyrolysis program at 5h00.
When the pyrolysis program is over, press the START/STOP touch
control.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ZX 3011 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ZX 3011 C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info