692604
32
Zoom out
Zoom in
Previous page
1/36
Next page
EN 8
Removing grease filters
1. Slide the hood out completely.
2. Push in the handle of the filter and remove the grease filter.
Carbon filter
Replacing the carbon filter
Use a carbon filter if the cooker hood is not connected to an exhaust duct.
1. Remove the grease filters.
2. Remove the mounting bracket by pulling it out.
3. Attach the carbon filter.
4. Place the mounting bracket in position.
5. Place the grease filters in position.
Important:
The saturation of the filter depends on the intensity of use, the
manner of cooking and the regularity with which the grease
filters are cleaned.
The carbon filter must be replaced every four months at a minimum.
Carbon filters are not washable for reuse. Saturated carbon is not
environmentally-friendly; replace the filter in a timely manner.
Lighting
Replacement of defective LED lighting should be done by
aprofessional fitter.
SERVICING
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WV6311LM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WV6311LM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG WV6311LM

ATAG WV6311LM Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info