692598

ATAG WU1111PMX Manual

50
Zoom out
Zoom in
Previous page
1/60
Next page
EN 8
Grease filters
Removing the grease filters
• Before you can remove the grease filters, you must open the edge-
extractor panel.
• Hook your fingers behind the panel and use your thumbs to lever it
away from the edge of the extractor hood.
• Flip the edge-extractor panel downwards.
• Release the latch cables by turning the bayonet catch 180 degrees
and allow the panel to drop down fully.
• Take hold of the grease filter using the handgrip and depress the
catch (1). Tilt the front side of the filter downwards (2). Now lift the
filter from the hood towards you
• Clean the grease filters (see “Cleaning the grease filters”) .
• Put the filter back into place by first pushing the rear side into
the holder. Keep the catch in the handgrip depressed and
simultaneously tilt the front side upwards as far as it goes and then
release the catch. The filter is now once again in place.
• Attach the latch cables to the edge-extractor panel and press the
edge-extractor panel into place.
Grease filter indication
• Grease filter indicator: “saturation” after being used for 40 hours.
When the grease filter is saturated, the decimal point will light up on
the display.
• The grease filter indicator can be reset by pressing and holding in
the timer button on the remote control for 5 seconds.
Lighting
Changing the light bulbs
Faulty LEDs must be replaced by a professional installer.
MAINTENANCE
1
2
1
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WU1111PMX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WU1111PMX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info