481592

ATAG WT 411K Manual

7
Zoom out
Zoom in
Previous page
1/30
Next page
GB 3
use
switch the fan on
Press the on/off key once.
The fan switches on at setting 3, and the
green light above the on/off key comes on.
control the extraction capacity
Press key 3 for a lower extraction
capacity. The green light above the key
comes on.
Press key 4 for a higher extraction
capacity. The green light above the key
comes on.
automatic continued operation
Press the plus key once; the appliance
will keep running for 10 minutes after you
have switched it off (2). The green light above
the '10' comes on.
Press the plus key twice; the appliance will
keep running for 20 minutes after you have
switched it off (2). The green light above the
'20' comes on.
Press the plus key three times; the automatic
running-on function will be cancelled.
switch the fan off
Press the on/off key once more. The green
light above the on/off key goes out.
clean the grease filter
The electronic memory of the control unit
records the number of hours the extractor
hood has been in operation.
After 24 hours of operation the green light
above the grease filter indicator key shows
that the filter should be cleaned.
Clean the grease filter if the green light above
the grease filter indicator comes on.
Press the grease filter indicator key after you
have cleaned the grease filter.
The electronic memory will be erased. (you
can only erase the memory after 24 hours of
operation has been reached).
GB 2
for your safety
flambée and frying
When deep-frying, always keep a close
watch.
Never flambe under an extractor hood. The
high flames can cause fire, even if the
ventilator is switched off.
air supply
If you are using the appliance for the first
time then check that the air supply is
sufficient. Dangerous situations can arise if
there is a combination of insufficient air
supply and the use of naked flames.
cleaning
Clean the extractor hood when the indicator
of the grease filter is lighting up.
Follow the instructions for cleaning the filter
and the appliance to meet the requirements
for optimal fire safety. This minimizes the
chance of a fire starting.
switch the lighting on
Press the light button .
The green light above the lighting key will
light up.
switch the lighting off
Press the light button again.
The green light above the lighting key goes
out.
lighting
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WT 411K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WT 411K in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info