Manual ATAG WS9211PC (page 46 of 50) (English, German, Dutch, French)

557011

Zoom out

Zoom in

1/50

GB 10

FAULTS

What should I do if...

If the appliance does not work properly, this does not always mean

that it is defective. Try to deal with the problem yourself first. Phone the

service department if the advice given below does not work.

Attention

Disconnect the appliance from the mains before starting the repair,

preferably by removing the plug from the socket or setting the main

switch to zero.

Faults table

Symptom Possible cause Solution

Lighting is not functioning. Light bulb defective. Remove the grease filters.

This gives access to the light

bulbs. Unscrew the bulb from

the fitting and replace it with

a bulb matching the wattage

stated at the inside of the

hood.

Extractor hood makes a

noise.

Discharge too long or too

many bends in the duct.

Flap defective.

Change the discharge ducting

(see installation guide).

Phone the service

department.

No extraction. Flap or controle defective.

Connection cable defective.

Phone the service

department.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS9211PC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WS9211PC Manual

Product: