692574
72
Zoom out
Zoom in
Previous page
1/86
Next page
EN 10
Replace odour/fine particle filter signal
If you switch on the cooker hood and the number ‘2’ flashes on
the display, the odour/fine particle filter needs to be replaced. This
message will appear when the cooker hood has been in operation
for 320 hours. See ‘Maintenance’ chapter. Once you have installed
the new filter, you can switch off the signal by pressing the on/off
button for at least three seconds.
If the grease filters also need to be cleaned, the numbers ‘1’ and
‘2’ will flash alternately. In that case, the procedure for switching
off the signal will have to be carried out twice.
If you want the signal to reappear the next time you need to replace
the odour/fine particle filter, you must reactivate the signal; switch
off the cooker hood with the on/off button and then simultaneously
press the fan button and the light button for at least three seconds.
The numbers ‘1’ and ‘2’ will flash on the display for two seconds.
The signal to replace the odour/fine particle filter will then
reappear the next time.
If you do not want the signal to appear the next time you need
to replace the odour/fine particle filter, you must deactivate the
signal; switch off the cooker hood with the on/off button and then
simultaneously press the fan button and the light button for at least
three seconds.
The number ‘1’ will flash on the display for two seconds. The
signal to replace the odour/fine particle filter will no longer
appear.
OPERATION
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WS9111MRL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS9111MRL in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG WS9111MRL

ATAG WS9111MRL Additional guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info