634352

ATAG WS9111MR Manual

69
Zoom out
Zoom in
Previous page
1/82
Next page
EN 9
▷ If you press the timer button with the hood in setting 3, the hood
will switch off after 10 minutes.
▷ If you press the timer button with the hood in setting 4, the hood
will switch off after 5 minutes.
If the switch-off time has been set, a dot will blink in the display.
• You can switch off the hood completely during the switch-off time
by pressing the On/Off button or the timer button.
• If you press the fan button during the switch-off time, the hood
keeps active and will not switch off automatically.
Switching the light on/off
• Press the light button.
The lighting comes on.
• Press the light button again.
The lighting goes off.
Grease filter signal
• The grease filter signal occurs after 40 hours of operation and is
shown in the display with number 1 flashing. Such signal means
that the grease filter needs to be cleaned. The signal is visible when
the hood is ON. On page 12 and 13 you can read how to clean
the grease filters. Have you replaced the grease filters, you can
deactivate the grease filter signal by pressing the On/Off button for
at least three seconds, until it goes off.
▷ If the charcoal filter has to be cleaned also, numbers 1 and 2
flash alternately in the display. To reset, carry out the procedure
to deactivate the signal twice.
Charcoal filter signal
• The charcoal filter signal occurs after 320 hours of operation and
is shown in the display with number 2 flashing. Such signal means
that the charcoal filter needs to be cleaned. The signal is visible
when the hood is ON. On page 13 and 14 you can read how to
clean the charcoal filter. Have you replaced the charcoal filter, you
can deactivate the charcoal filter signal by pressing the On/Off
button for at least three seconds, until it switches off.
▷ If the grease filters have to be cleaned too, numbers 1 and 2
flash alternately in the display. To reset, carry out the procedure
to deactivate the signal twice.
OPERATION
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WS9111MR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS9111MR in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info