557026
46
Zoom out
Zoom in
Previous page
1/62
Next page
GB 10
MAINTENANCE
Grease filters
Removing grease filters
Switch off the main Voltage! Remove the plug from the socket or turn
the switch in the meter box to zero. Pull the filter towards you and tilt it
down and forwards.
Carbon filter
Replacing the carbon filter
Use a carbon filter if the extractor fan is not connected to an exhaust
duct.
1. Remove the grease filters
2. Install the carbon filters
3. Install the grease filters.
Important:
The saturation of the filter depends on the intensity of use, the
cooking method and the regularity with which the grease filters are
cleaned.
The carbon filter must be replaced a minimum of every four months.
Carbon filters cannot be washed for re-use. Saturated carbon is not
environmentally friendly. Replace the filter in time.
Bulbs
Replacing bulbs (WS9111EM/WS9111EX/WS9192EM)
Remove the cover from the bulb
Replace the halogen bulb with a new bulb of a maximum of 20
Watts.
• Install the cover again.
Replacing bulbs (WS6011IM/WS9011IM/WS1211IM)
Gently press the front side of the window (A) and it should tilt open
slightly.
Open the window fully and fit a new 20 W halogen bulb (A).
Note: do not touch the bulb’s glass with your fingers.
Gently push the window closed again.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WS9111EM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS9111EM in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info