Manual ATAG WS9011QAM (page 72 of 102) (English, German, Dutch, Danish, French)

557014

Zoom out

Zoom in

1/102

GB 12

INSTALLATION

General

This appliance should be connected to the mains power by a registered

installer, who knows and applies the correct safety specifications.

We hereby declare that our products satisfy the applicable European

directives, orders and regulations, as well as the requirements stated in

the referenced standards.

Important information:

• The distance between the lowest point of the cooker hood and

a gas hob should be at least 65 cm. With an electric, ceramic or

induction hob this distance should be at least 55 cm.

• Follow the applicable local regulations regarding the ventilation of

gas appliances.

• The cooker hood will work better with a short outlet pipe and the

fewest bends possible.

• Prior to drilling check that there are no pipes or cables present.

• The cooker hood connection pipe is 120 mm, 125 mm or 150 mm

in diameter. Use the largest possible (150 mm) flue of the same

diameter.

• The installation material provided with this cooker hood is suitable

for reinforced concrete and brick walls. You will need special plugs

and screws for certain walls.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS9011QAM in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 9,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WS9011QAM Manual

Product: