481529

ATAG WS7011MAM Manual

90
Zoom out
Zoom in
Previous page
1/108
Next page
GB 13
button, the timer function is activated for 15 minutes. After this time has
elapsed the hood will turn off (motor and any light on).
Indicator E
Lights indicator
The lights indicator will switch on when the lights are on at any level.
Indicator F
Filters indicator
After 30 minutes of operation, the led of the filters indicator will switch
on, not flashing indicating that the anti-grease filters have to be
washed. To reset the function (with the hood off), press the Fan speed
button for 5 seconds. After this operation, the led of the filters indicator
turns off and the setting of the 30 hours starts again from the beginning.
After 120 hours the led will flash continuously. This means that the
carbon filters have to be replaced (if present). To reset the function
(with hood off) press the Fan speed button for 5 seconds. After this
operation, the led of the indicator turns off and the setting starts again
from the beginning.
Indicator G
With the hood off, press the Power button (1) for 5 seconds to activate
the clean air function. This will switch on the motor at speed 1 for 10
minutes every hour. The light indicator will switch on without flashing
and the led of the 1st speed will switch on. In the remaining 50 minutes
the light indicator will flash. The function can be deactivated by
pressing any button except for the lights one.
USE
… 90 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WS7011MAM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS7011MAM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info