557029

ATAG WS6011MR Manual

76
Zoom out
Zoom in
Previous page
1/90
Next page
GB 10
Setting the switch-off time
You can use the timer button to set a period of time after which the
hood switches off automatically. You can use this feature, for example,
when you have finished cooking, but still want the extractor hood to
keep running for a while.
• Be sure the hood is switched on and that it has been set to a
setting.
• Press the timer button.
The hood remains at the selected setting for 10 minutes, after which
the hood is automatically switched off.
▷ If the lighting was switched on during the automatic continued
running, it will remain switched on. The lighting will be
automatically dimmed to 30-40% of the maximum light strength.
• You can switch off the hood completely during the switch-off time
by pressing the the timer button.
Switching the light on/off
• Briefly press the light button.
The light switches on at its highest setting.
• Press the button once again and keep it pressed in order to set the
intensity of the lighting. The lighting changes from the brightest to
dimmest setting and vice versa, for as long as you keep the button
pressed.
• Press the light button for a third time and the light switches off.
Grease filter signal
• The grease filter signal occurs after 40 hours of operation and is
shown in the display with the first red LED flashing. Such signal
means that the grease filter needs to be cleaned. On page 12 and
13 you can read how to clean the grease filters. Have you replaced
the grease filters, you can deactivate the grease filter signal by
pressing the Off button for at least five seconds.
Charcoal filter signal
• The charcoal filter signal occurs after 320 hours of operation and is
shown in the display with the second red LED flashing. Such signal
means that the charcoal filter needs to be cleaned. On page 13 and
14 you can read how to clean the charcoal filter. Have you replaced
the charcoal filter, you can deactivate the charcoal filter signal by
pressing the On button for at least five seconds.
12h
OPERATION
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WS6011MR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS6011MR in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info