Manual ATAG WS1211MAX (page 94 of 108) (English, German, Dutch, French)

481540

Zoom out

Zoom in

1/108

GB 17

INSTALLATION

General

This appliance should be connected to the power supply by a qualified

technician who is familiar with, and works according to the correct

safety regulations.

We declare that our products meet the applicable European Directives,

Decisions and Regulations and the requirements listed in the standards

referenced.

Important that you know:

• The minimum distance between the supporting surface for the

cooking vessels on the gashob and the lowest part of the range

hood must be not less than 65 cm. For use with an electric, ceramic

or induction hob, this distance must be at least 55 cm.

• If the cooker hood is to be fitted to an existing duct no other

appliances, such as a geyser or heater, may be connected to that

same duct.

• Consider local regulations with respect to the ventilation of gas

appliances.

• The shorter the duct, and the fewer the bends in it, the better the

cooker hood will work.

• Before you start drilling check that there are no installation cables

present.

• The connecting pipe for the cooker hood has a diameter of 120,

125 or 150 mm. It is best also to use a flue pipe of the same

diameter.

• The installation material supplied with this range hood is designed

for fixing to reinforced concrete or masonry walls. For some types

of walls you may need special plugs and screws.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS1211MAX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WS1211MAX Manual

Product: