Manual ATAG WS1211MAX (page 91 of 108) (English, German, Dutch, French)

481540

Zoom out

Zoom in

1/108

GB 14

Cleaning

Attention! Before performing any maintenance operation, isolate the

hood from the electrical supply by switching off at the connector and

removing the connector fuse. Or if the appliance has been connected

through a plug and socket, then the plug must be removed from the

socket.

The cooker hood should be cleaned regularly (at least with the same

frequency with which you carry out maintenance of the fat filters)

internally and externally. Do not use abrasive products. Do not use

alcohol!

Attention! Failure to carry out the basic cleaning recommendations

of the cooker hood and replacement of the filters may cause fire

risks. Therefore, we recommend oserving these instructions. The

manufacturer declines all responsibility for any damage to the motor

or any fire damage linked to inappropriate maintenance or failure to

observe the above safety recommendations.

Cooker hood

Clean the cooker hood with soapy water and a soft cloth. Then wipe

with clean water to rinse. Do not use aggressive cleaning agents such

as soda. The cooker hood paintwork will stay looking nice if you wax it

occasionally.

Stainless steel cooker hoods

Do not use any sort of scourer. Treat with a stainless steel care product

and polish with the structure of the stainless steel.

Metal grease filters

These must be cleaned once a month (or when the filter saturation

indication system – if envisaged on the model in possession – indicates

this necessity) using non aggressive detergents, either by hand or in the

dishwasher, which must be set to a low temperature and a short cycle.

The openings must be placed downwards to let the water run out of the

filters. The cleaning agents will make the aluminium filter turn dull, this

is normal.

MAINTENANCE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS1211MAX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WS1211MAX Manual

Product: