Manual ATAG WS1011RAM (page 68 of 102) (English, German, Dutch, Danish, French)

557020

Zoom out

Zoom in

1/102

GB 8

Cleaning filters

Saturation grease and carbon filters

The filters should be replaced or cleaned when the grease filter

indicator (4) or the carbon filter indicator (3) are lit.

Grease filter

The grease filter indicator (4) will flash after 30 operating hours.

• The grease filters should then be cleaned.

• Reset the memory by pressing and holding the ‘-’ button (2) until

the grease filter indicator (4) stops flashing.

Carbon filter

The carbon filter indicator (3) will flash after 120 operating hours.

• The carbon filter should then be cleaned or replaced.

• Reset the memory by simultaneously pressing and holding the ‘-’ (2)

and ‘+’ (8) buttons until the carbon filter indicator (3) stops flashing.

Switching on carbon filter indicator

• Simultaneously press and hold the ‘+’ (8) button and the lighting

button (1) until the carbon filter indicator (3) flashes twice.

The carbon filter indicator is activated.

Switching off carbon filter indicator

• Simultaneously press and hold the ‘+’ (8) button and the lighting

button (1) until the carbon filter indicator (3) flashes once.

The carbon filter indicator is switched on:

• The carbon filter indicator (3) lights up for 3 seconds.

The carbon filter indicator is switched off:

• The carbon filter indicator (3) flashes for 3 seconds.

USE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS1011RAM in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 9,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WS1011RAM Manual

Product: