108866
22
Zoom out
Zoom in
Previous page
1/25
Next page
GB 5
safety
what you should pay attention to
during use
Flambéing under an extractor hood is not permitted. The high
flames could cause a fire, even if the fan is switched off.
Always keep an eye on things when deep-frying.
Switch the extractor hood on before starting to cook. Leave
the extractor hood on for about ten minutes after you have
finished cooking. You can do this automatically (see page 7,
"operation – automatic continued running").
Clean the extractor hood regularly, as specified on page 8,
"maintenance". In this way, you prevent the risk of fire.
Disconnect the extractor hood from the mains before
replacing the light bulbs! Only use the same light bulbs, with
the wattage stated.
GB 4
general
This extractor hood is extremely safe. There are, however, a
number of things you have to pay attention to, just as for any
other product.
This appliance should only be connected by a registered
installer.
Repairs should only be carried out by an authorised service
engineer.
Never open the casing and do not alter the mechanical and/or
electrical structure of the appliance. This could result in
dangerous situations (touching live components) and faults.
Do not use the appliance if it is damaged.
The appliance should be disconnected from the mains before
being repaired or cleaned. Remove the plug from the socket
or turn the switch in the meter cupboard to zero.
For electrical safety reasons, the appliance must not be
cleaned using high-pressure cleaners or steam cleaners.
safety
what you should pay attention to
For safety tips in
relation to the
installation, we refer
you to the
instructions in the
accompanying
installation guide.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WS 9011 ZM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS 9011 ZM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info