108883
14
Zoom out
Zoom in
Previous page
1/38
Next page
GB 5
fan (continued)
Press button for about 4 seconds to switch on the
Clean Air function. The 4
th
green LED in the operational panel
flashes for as long as setting 1 is switched on (duration 10
minutes). The 4
th
green LED is permanently lit in the switched
off phase (duration 50 minutes).
After 12 hours the Clean Air function is automatically
switched off. Press button for about 4 seconds to
switch off the Clean Air function after a shorter period.
Attention: if you switch on the extractor hood during use of
the Clean Air function, the Clean Air function will be
cancelled and the extractor hood will continue to operate on
the programmed setting.
grease filter indicator
If the 1
st
red LED in the control panel starts to flash, clean the
filter immediately.
Replace the cleaned filter and erase the electronic memory
by pressing the button for approx. 5 seconds.
The 1st red LED stops flashing.
OFF
12h
12h
GB 4
intensive setting
Press button for a minimum of 2 seconds.
The extractor hood switches to its highest setting for 10
minutes (setting 4). In the control panel the 4
th
green LED
flashes.
After 10 minutes the extractor hood switches back to the
original setting.
switching off the fan
Repeatedly press the key until all green LEDs in the
control panel are off or press key for at least 2
seconds in order to switch off the extractor hood.
automatic continued operation
Choose the fan setting desired and press button .
The extractor hood remains at the selected setting for 10
minutes, after which the extractor hood is automatically
switched off.
If the lighting was switched on during the automatic
continued running, it will remain switched on. The lighting
will be automatically dimmed to 30-40% of the maximum light
strength.
Clean Air function
You can use the Clean Air function to regularly freshen the
air in your residence.
During the Clean Air function, every hour the extractor hood
operates for 10 minutes on setting 1. It then remains
switched off for 50 minutes. This cycle repeats for 12 hours.
12h
OFF
OFF
ON
fan (continued)
OFF ON 12h
OFF ON 12h
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WS 9011 N M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WS 9011 N M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info