557050

ATAG WO6211AC Manual

50
Zoom out
Zoom in
Previous page
1/58
Next page
GB 8
Cleaning
Enamelled extractor hoods
Clean the extractor hood with soap and a soft cloth. Then rinse with
clean water. Do not use aggressive cleaning agents, such as soda. The
enamel will remain attractive if you polish it with wax from time to time.
Stainless steel extractor hoods
For cleaning the stainless steel parts you can best use a mild cleaning
agent (washing-up liquid) and a damp cloth. Dry with kitchen paper or
a dry cloth.
The stainless steel regains its shine if you occasionally use a stainless-
steel care product or polish. The polish applies a dirt-resistant layer to
the stainless steel. Always clean the stainless steel in the direction of
polishing.
ATAG supplies cleaning and maintenance agents for extractor
hoods. For information on availability, please contact the consumer
department (see warranty conditions for the phone numbers).
Never use abrasive cleaning agents (such as green scourers or other
scouring pads) or polishing cleaning agents (such as liquid abrasives).
Never use caustic agents. These can attack the stainless steel.
Grease filters
Clean the grease filters at least once a month. During cleaning, the
aluminium parts of the filters may become dull as a result of the
cleaning agents used, particularly when placed in the dishwasher. This
is normal and is not covered by the warranty.
Removing aluminium grease filter
1 Switch off the flap and lighting.
2 Unlock the grille (A) and hinge it downwards.
3 Push the wire brackets aside.
4 Remove the grease filter from the grille.
MAINTENANCE
A
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WO6211AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WO6211AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info