108873

ATAG WO 6055 BM Manual

33
Zoom out
Zoom in
Previous page
1/37
Next page
GB 9
maintenance
cleaning
GB 8
maintenance
cleaning
grease filters
Clean the grease filters at least once a month. During
cleaning, the aluminium parts of the filters may become dull
as a result of the cleaning agents used, particularly when
placed in the dishwasher. This is normal and is not covered
by the warranty.
removing aluminium grease filter
1 Switch off the fan and lighting.
2 Unlock the grille (A) and hinge it downwards.
3 Push the wire brackets aside.
4 Remove the grease filter from the grille.
removing filter cassette
1 Switch off the fan and lighting.
2 Using the recess, press the filter backwards and tip it
downwards at the front.
3 Remove the filter from the hood.
cleaning
You can clean the filters in the dishwasher. Allow them to
drain fully before reinstalling them in the hood.
The filters may also be cleaned by hand.
Clean the filters in water and washing-up liquid and rinse
them. Allow the filters to drain fully. The underside of the
extractor hood can be cleaned with a mild cleaning agent and
a moist cloth. Then dry it off with kitchen towel or a dry
cloth.
A
1
2
reinstalling the aluminium grease filter
1 Place the filter in the grille.
2 Refit the wire brackets.
3 Place the grille back in the extractor hood. First press the
back into the hood; then the front. The filter will now click
into place.
4 Lock the filter in place by pushing the locking projections
outwards.
reinstalling filter cassette
The filter has to be installed with the locking mechanism at
the front.
Open the locking mechanism. This pulls the projections at
the front of the filter inwards. When installing the filters hold
the locking mechanism in this position.
1 Push the projections at the back of the filter into the
openings provided for this purpose at the rear of the
extractor hood.
2 Hinge the filter upwards.
3 Release the locking mechanism. The projections at the
front of the filter move outwards into the openings
provided for this purpose at the front of the extractor
hood.
The filter is now correctly positioned.
A
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WO 6055 BM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WO 6055 BM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info