Manual ATAG WO 6055 AC (page 34 of 37) (English, German, Dutch, French)

108871

Zoom out

Zoom in

1/37

GB 10 GB 11

faults

what should I do if…

If the appliance does not work properly, this does not always mean that it is defective.

Try to deal with the problem yourself first. Phone the service department if the advice

given below does not work.

attention:

Disconnect the appliance from the mains before starting the repair, preferably by

removing the plug from the socket or setting the main switch to zero.

carbon filter

If you plan to use the appliance as a recirculation hood, you

must first install the carbon filter. You must then also set the

switch located at the back of the appliance to F. In the case

of normal use the carbon filter must be replaced twice

annually. In the case of intensive use the carbon filter should

be replaced more frequently.

installing / replacing

1 Remove the grease filters.

2 Remove the cover from the carbon filter housing.

3 Place the carbon filter in the carbon filter housing.

4 Secure the filter with locking pin A.

5 Reinstall the carbon filter cover.

6 If necessary set the switch in the appliance to position "F"

(filter mode) (see also "setting", below).

7 Reinstall the grease filters.

setting

Remove the filters from the extractor hood.

If you are going to use the appliance as a recirculation hood,

set the switch located inside the appliance at the back to

position F (filter mode) (the flap is closed). You must then

also install the carbon filter (see "carbon filter", above).

If you are connecting the hood to a flue, set the switch

located inside the appliance at the back to position A (the flap

is open).

maintenance

cleaning

fault

Lighting is not functioning.

Extractor hood makes a

noise.

No extraction.

cause

Light bulb defective.

Halogen bulb defective.

attention:

Use only the same light

bulbs with the wattage

stated.

Discharge too long or too

many bends in the duct.

Motor defective.

Motor or controls defective.

Connection cable defective.

solution

Remove the grease filters.

This gives access to the

light bulbs. Unscrew the

bulb from the fitting and

replace it with a new 40 W

bulb.

Pull the inner ring

downwards with a

screwdriver (see

illustration).

Take care: The glass is

loose!

Pull the halogen bulb out

of the fitting and replace it

with a new 20 W halogen

bulb. Use a clean cloth to

hold the new bulb.

Change the discharge

ducting (see installation

guide).

Phone the service

department.

Phone the service

department.

Phone the service

department.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WO 6055 AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WO 6055 AC Manual

Product: