Manual ATAG WI6255BC (page 44 of 50) (English, German, Dutch, French)

557048

Zoom out

Zoom in

1/50

GB 8

MAINTENANCE

Removing filter cassette

1 Switch off the flap and lighting.

2 Using the recess, press the filter backwards and tip it downwards

at the front.

3 Remove the filter from the hood.

Cleaning

You can clean the filters in the dishwasher. Allow them to drain fully

before reinstalling them in the hood.

The filters may also be cleaned by hand.

Clean the filters in water and washing-up liquid and rinse them. Allow

the filters to drain fully. The underside of the extractor hood can be

cleaned with a mild cleaning agent and a moist cloth. Then dry it off

with kitchen towel or a dry cloth.

Reinstalling filter cassette

The filter has to be installed with the locking mechanism at the bottom.

Open the locking mechanism. This pulls the projections at the front of

the filter inwards. When installing the filters hold the locking mechanism

in this position.

1 Push the projections at the top of the filter into the openings

provided for this purpose at the top of the extractor hood.

2 Hinge the filter backwards.

3 Release the locking mechanism. The projections at the bottom

of the filter move outwards into the openings provided for this

purpose at the front of the extractor hood.

The filter is now correctly positioned.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WI6255BC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WI6255BC Manual

Product: