Manual ATAG wg 811 b (page 30 of 62) (English, German, Dutch, French)

131907

Zoom out

Zoom in

1/62

GB 12

assembly (continued)

Mount the hood on the fixing supports in the hood with the

bolts supplied M5 x 12 (2x), screwing the bolts in loosely (3).

Fit the adjustment bolts supplied M8 x 16 (2x) into the

welded-on nuts in the hood (4).

Level the hood front to back using the adjustment bolts.

Tighten the bolts M5 x 12 (2x) in the fixing support in the

hood. Then tighten the bolts M5 x 12 (2x) that have already

been fitted in the top of the hood (5).

Make the plug connections in the hood.

WG7

assembling the connecting bar

Through the opening of the left filter holder and the round

hole on the side of the suspension module, push the

connecting bar that comes from the knob into the hole in the

coupling plate (1) and secure with the rapid-fix nut (2).

adjusting the valve

If the knob for controlling the valve is in the closed position,

the valve in the pipe should completely seal off the hole

horizontally. If this is not the case, the valve can be adjusted

to the horizontal by moving the bracket in the direction of the

arrow (3).

700000929100 WG3_4_7_8B 26-05-2003 10:26 Pagina GB 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG wg 811 b in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG wg 811 b Manual

Product: