Manual ATAG wg 711 b rvs (page 29 of 62) (English, German, Dutch, French)

129949

Zoom out

Zoom in

1/62

GB 11

assembly (continued)

marking out and fitting motor module

Mark the position of the underside of the hood on the wall

(bear in mind the minimum distance to the hob). Mark the

(vertical) centre line.

Fold or cut the template depending on type and mark the

upper fixing holes.

Drill the fixing holes (2 x ø 10 mm).

Fix the plugs. Screw two nuts onto the threaded ends in the

opposite direction. Screw the threaded ends into the wall

leaving 20 mm projecting (see illustration).

Remove the nuts.

Suspend the motor module on the threaded ends (1). Screw

the nuts on. Make sure that the motor module is exactly level.

Drill the holes (2 x ø 6 mm) and fit the fixing brackets with

the fixing pins supplied 6 x 60 mm (2), thereby also securing

the motor module.

Fit the discharge duct.

Connect the motor module electrically.

fitting the hood

Slide the top of the hood over the motor module (1). Screw

the hood to the motor module using the screws supplied

4.2 x 9.5 mm (4x) (2).

WG7

Attention: slide the connecting bar for the valve between the

adjusting bracket and the suspension module (see

'assembling the connecting bar').

700000929100 WG3_4_7_8B 26-05-2003 10:26 Pagina GB 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG wg 711 b rvs in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG wg 711 b rvs Manual

Product: