Manual ATAG wg 711 b rvs (page 24 of 62) (English, German, Dutch, French)

129949

Zoom out

Zoom in

1/62

GB 6

maintenance (continued)

removing/replacing grease filters

Remove the filters as follows: switch the fan and the lighting

off.

Push the filter at the edge of the niche to the back (1) and

pull the front end down (2). You can now remove the filter

from the hood.

The filter can only be put back into place in one way. Take

note of the correct position of the filter (see illustration).

Hold the filter in such a way that the covered part of the

underside is at the centre rear. This is recognizable on the

outside by the pattern with the smaller holes.

Put the filter back into place by first pushing the rear side

into the holder. Then push the front upwards until it cannot

go any further and let the filter slide forwards. The filter is

now once again in place.

cleaning the grease filters

You can clean the grease filters in the dishwasher. Allow the

filter to drain well - through the slits in the side - before

putting it back.

replacing the carbon filter (WG8)

Replace the carbon filter twice a year. This only applies to

recirculation hoods.

Put the carbon filter in the place intended for it above the

filters.

700000929100 WG3_4_7_8B 26-05-2003 10:26 Pagina GB 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG wg 711 b rvs in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG wg 711 b rvs Manual

Product: