634493
24
Zoom out
Zoom in
Previous page
1/32
Next page
Installation
519
1189
550
30-94
596
573
550
54
377
680-760
30
670
195
444
49
700
824 -872
133-183
[mm]
*Remove locking nuts and any coasters for an installed
height of 820-824 mm.
**Door length.
It is important that you read through and follow the instructions
and directions below. Conduct installation and connection in
accordance with the separate installation instructions.
Safety instructions
Connections to electricity, water and drainage must be
performed by a qualified professional.
Always follow applicable regulations for water, drainage and
electricity.
An incorrect or flawed installation can result in higher
consumption of energy, water and detergent, which can result
in increased costs and poor dishwashing results. In order to
minimise noise it is important that you follow the instructions.
Take care during installation! Wear protective gloves! There
must always be two people!
Place a watertight protective tray on the floor beneath the
dishwasher to prevent damage from any water leaks.
Before screwing the dishwasher into place, test the dishwasher
by running the Rinse & Hold programme. Check that the
dishwasher fills with water and drains. Check also that none
of the connections leak.
WARNING!
Turn off the water supply when installing the dishwasher!
WARNING!
The plug must be disconnected or power to the socket turned
off while the work is carried out!
Setup
The recess and connection dimensions are included in the
separate installation instructions. Check that all dimensions
are correct before starting the installation. Note that the height
of the cover door can be adjusted to match other fittings.
Make sure the area on which the dishwasher is to be installed
is firm. Adjust the adjustable feet so that the dishwasher is
level. Tighten the lock nuts.
Drainage connection
See the separate installation instructions for all necessary
information.
This dishwasher is suitable for installing in a raised recess (to
attain an ergonomic working height). This means that the
dishwasher can be placed so that the drainage hose runs to a
lower level than the bottom of the dishwasher, such as by routing
it directly to a floor drain. The dishwasher is fitted with an
integrated anti-siphon device to prevent the machine from being
emptied of water during the wash cycle.
The drainage hose can also be connected to a connection nipple
on the sink unit's water trap. The connection nipple must have
an internal diameter of at least 14 mm.
The drainage hose may be extended by a maximum of 3 m (the
total length of the drainage hose must not exceed 4.5 m). Any
joins and connecting pipes must have an internal diameter of at
least 14 mm. However, the drainage hose should ideally be
replaced with a new hose without joins.
No part of the drainage hose may be more than 950 mm above
the bottom of the dishwasher.
Ensure that the drainage hose has no kinks.
Connection to water supply
Use only the supply hose provided with the dishwasher. Do not
re-use old hoses or other spare supply hoses.
The supply pipe must be fitted with a stopcock. The stopcock
must be easily accessible, so that the water can be shut off if the
dishwasher has to be moved.
22
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG VA68211TT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA68211TT in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG VA68211TT

ATAG VA68211TT Installation Guide - English, German - 2 pages

ATAG VA68211TT User Manual - German - 32 pages

ATAG VA68211TT Installation Guide - Dutch - 2 pages

ATAG VA68211TT User Manual - Dutch - 32 pages

ATAG VA68211TT Installation Guide - French - 2 pages

ATAG VA68211TT User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info