Manual ATAG VA61111MT (page 22 of 56) (English, German, Dutch, French)

557001

Zoom out

Zoom in

1/56

2. Press the on/off button to activate the

appliance. Make sure that the appliance

is in setting mode, refer to ’Setting and

starting a programme’.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill the

rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

• If you use the combi detergent tab-

lets, activate the multitab option.

5. Set and start the correct programme for

the type of load and the degree of soil.

Using the detergent

A D

1. Press the release button (B) to open

the lid (C).

2. Put the detergent in the compartment

(A) .

If the programme has a prewash

phase, put a small quantity of deter-

gent in the compartment (D).

If you use detergent tablets, put the

tablet in the compartment (A).

5. Close the lid. Make sure that the re-

lease button locks into position.

Setting and starting a

programme

The Auto Off function

To decrease the energy consumption, this

function automatically deactivates the appli-

ance a few minutes after:

• You have not closed the door to start the

programme.

• The programme is completed.

Setting mode

For some settings it is necessary that the

appliance is in setting mode.

The appliance is in setting mode when, af-

ter the activation, the display shows pro-

gramme ECO.

If the control panel does not show this con-

dition, press RESET. The display shows

programme ECO.

Starting a programme without delay

start

1. Open the water tap.

2. Press the on/off button to activate the

appliance. Make sure that the appliance

is in setting mode.

3. Press one of the programme buttons

until the display shows the number of

the programme you want to set.

• After some seconds the display

shows the programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA61111MT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG VA61111MT Manual

Product: