Manual ATAG VA61111MT (page 19 of 56) (English, German, Dutch, French)

557001

Zoom out

Zoom in

1/56

Programme

Duration

(min)

Energy

(kWh)

Water

(l)

195 1.03 11

14 0.1 4

30 0.8 4

1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of

dishes can change the values.

Information for test institutes

For all the necessary information for test performance. send an email to:

info.test@dishwasher-production.com

Write down the product number (PNC) that is on the rating plate.

OPTIONS

Activate or deactivate the options be-

fore the start of a programme. You

cannot activate or deactivate the op-

tions while a programme operates.

If one or more options are set, make

sure that the related indicators are on

before the programme starts.

Half-load

Activate or deactivate this option be-

fore the start of a programme. You

cannot activate or deactivate this op-

tion while a programme operates.

Set this option when you want to wash a

small quantity of tableware and cookware.

This option decreases the programme du-

ration and the consumption of energy and

water.

Load the upper basket and the lower bas-

ket and decrease the quantity of detergent.

Multitab

Activate this option only when you use the

combi detergent tablets.

This option deactivates the use of rinse aid

and salt. The related indicators stay off.

The programme duration can increase.

How to activate the Multitab option

Press

, the related indicator

comes on.

If you stop to use the combi detergent

tablets, before you start to use

separately detergent, rinse aid and

dishwasher salt, do these steps:

1. Set the water softener to the highest

level.

2. Make sure that the salt container and

the rinse aid dispenser are full.

3. Start the shortest programme with a

rinsing phase, without detergent and

without dishes.

4. Adjust the water softener to the water

hardness in your area.

5. Adjust the released quantity of rinse aid.

Acoustic signals

The acoustic signals operates when the ap-

pliance has a malfunction. It is not possible

to deactivate this acoustic signal.

There is also an acoustic signal that oper-

ates when the programme is completed. By

default, this acoustic signal is off, but it is

possible to activate it.

How to activate the acoustic signal for

the end of programme

1. Press the on/off button to activate the

appliance. Make sure that the appliance

is in setting mode, refer to “Setting and

starting a programme”.

2. Press and hold, at the same time,

and until the ,

and indicators start to flash.

Press

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA61111MT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG VA61111MT Manual

Product: