Manual ATAG VA61111KT (page 19 of 48) (English, German, Dutch, French)

556999

Zoom out

Zoom in

1/48

Using the detergent

BA D

1. Press the release button (B) to open

the lid (C).

2. Put the detergent in the compartment

(A) .

If the programme has a prewash

phase, put a small quantity of deter-

gent in the compartment (D).

If you use detergent tablets, put the

tablet in the compartment (A).

Close the lid. Make sure that the re-

lease button locks into position.

Using the combi detergent

tablets

When you use tablets, that contain salt and

rinse aid, do not fill the salt container and

the rinse aid dispenser. The rinse aid indica-

tor always comes on if the rinse aid dis-

penser is empty.

1. Adjust the water softener to the lowest

level.

2. Set the rinse aid dispenser to the lowest

position.

If you stop to use the combi

detergent tablets, before you start

to use separately detergent, rinse

aid and dishwasher salt, do these

steps:

1. Press the on/off button to activate the

appliance.

2. Set the water softener to the highest

level.

3. Make sure that the salt container and

the rinse aid dispenser are full.

4. Start the shortest programme with a

rinsing phase, without detergent and

without dishes.

5. Adjust the water softener to the water

hardness in your area.

6. Adjust the released quantity of rinse aid.

Setting and starting a

programme

Reset function

For some settings it is necessary that the

appliance is in user mode.

The appliance is in user mode when all the

programme indicators are on.

To set the appliance in user mode, do the

Reset function

1. Press and hold the programme button

until all the programme indicators come

on.

Starting a programme without delay

start

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

3. Press the programme button again and

again until only the indicator of the pro-

gramme you want to set is on.

4. Close the appliance door. The pro-

gramme starts.

Starting a programme with delay

start

1. Set the programme.

2. Press the delay button to delay the start

of the programme of 3 hours.

• The delay indicator comes on.

3. Close the appliance door. The count-

down starts.

• When the countdown is completed,

the programme starts.

Opening the door while the

appliance operates

If you open the door, the appliance stops.

When you close the door, the appliance

continues from the point of interruption.

Cancelling the delay start while the

countdown operates

Do the Reset function.

When you cancel the delay start, you

have to set the programme again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA61111KT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG VA61111KT Manual

Product: