31
1. Check the filters
Ensure they are clean and properly positioned
(see "Maintenance and cleaning").
2. Press the On/Off push button
The On/Off indicator light and the indicator
light of the last programme selected will come
on (if options have been selected with
the programme; the corresponding indicator
lights will also illuminate).
3. Check that there is rinse aid
and salt
The corresponding indicator lights will
illuminate if refilling is necessary.
4. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the
plates, saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
5. Ensure that the spray arms
can rotate freely.
6. Measure out detergent
Add the required amount of detergent into the
dispenser.
Close the detergent dispenser lid.
Important!
If the "half load" option is selected
remember to reduce the quantity of
detergent.
7. Close the dishwasher door
8a. Setting and starting the
programme without "delay
start"
Press the push button that corresponds to the
programme you have selected: all indicator
lights of the phases of that programme will
come on.
You may also select the washing of only one
basket by choosing the "half load" option.
The indicator light of the selected basket
will illuminate.
Remember to load all dishes into the
selected basket.
Press the "programme start" push button, all
the indicator lights of the phases forseen for
that programme will turn off except for the
phase under way.
An audible signal will inform you that the
programme has started.
Operating sequence
