692637
18
Zoom out
Zoom in
Previous page
1/32
Next page
4
In order to inspect the drainage pump,
remove the coloured stop on the right
in the bottom drain.
5
Turn the pump wheel located behind
the drainage pump stop by hand.
Carefully remove any items.
6
Replace the drainage pump stop along
with the fine and coarse filters.
7
Plug the machine in again.
If the dishwasher still does not start and
a whirring sound is heard, the overflow
protection has been activated.
Shut off the water.
Remove the plug from the wall
socket.
Call the service department.
Drainage pump stop
NOTE!
Do not forget to replace the drainage
pump stop.
Unblocking the inlet hose filter
If the water supply contains small
particles, the outer filter on the inlet hose
may become blocked, which results in
Water inlet fault.
1
Turn off the machine using the main
power switch and unplug it from the
wall socket.
2
Turn off the water tap.
3
Unscrew the inlet hose.
4
Carefully remove the outer filter from
the inlet hose and clean it.
5
Replace the filter and check that the
gasket is correctly positioned.
6
Screw the inlet hose firmly into place.
7
Plug the machine into the wall socket
and turn on the water tap. Allow the
pressure to settle for a while and check
that the connection is watertight.
Outer filter on inlet
hose
Gasket
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG VA2013RT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA2013RT in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG VA2013RT

ATAG VA2013RT User Manual - German - 32 pages

ATAG VA2013RT User Manual - Dutch - 24 pages

ATAG VA2013RT User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info