127830
42
Zoom out
Zoom in
Previous page
1/52
Next page
42
Step 4. Connecting electricity, water and drain
1. ConnectConnect drain hose
The drain hose runs to an inlet plug on the ink
unit’s water trap.
Note:!
The hose must be fastened on a level with the
underside of the sink unit.
Cut the drain hose adapter to the appropriate size
for connection to the undersink drain or garbage
disposer. The overall length of the drainage hose
must not exceed 4,5 m.
No part of the drainage hose may be more than 950
mm above the bottom of the dishwasher. The hose
must not be run directly to the floor drain or similar.
The hose must always discharge at least 350 mm
above the bottom of the dishwasher.
Max 950mm
Min- 350mm
Min 16mm
2. Connect water supply hose
ConnecUse the supplied O ring and tighten the
connection by hand plus a quarter turn with a
wrench. Open the shutoff valve and let the pres-
sure settle for a while. Check the connections
again to make sure they are not leaking.
3. Connect the electric plug
Ensure that the power socket is within the
range of the power cable. Do not use an exten-
sion cord! The dishwasher must be connected
to a grounded outlet.
Connection pipe
Clamp
Water connection
Shut
off
valve
Hose barb
coupling
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG va 6611 rt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG va 6611 rt in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG va 6611 rt

ATAG va 6611 rt Installation Guide - English, German - 1 pages

ATAG va 6611 rt User Manual - German - 52 pages

ATAG va 6611 rt Additional guide - Dutch - 1 pages

ATAG va 6611 rt Installation Guide - Dutch - 1 pages

ATAG va 6611 rt User Manual - Dutch - 52 pages

ATAG va 6611 rt Installation Guide - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info