127827
33
Zoom out
Zoom in
Previous page
1/48
Next page
33
Installation and connection information
DISHWASHER CAVITY MEASUREMENTS
H =
Min
823 mm
50-105 mm
38 mm
W = 600 mm
Min 565mm
WATER CONNECTION
• The machine can be connected to a cold or
hot water supply (maximum 85°C). However,°C). However,C). However,
we recommend connection to a cold water
supply.
• The inlet pipe has a connector with either a
3/4” internal thread.
DISHWASHER MEASUREMENTS
ELECTRICAL CONNECTION
• 220-230VAC mains voltage, minimum 15A
DRAINAGE
• The supplied cone-shaped connection pipe
fits a drainage connection with an internal
diameter of 13, 16, 18 and 22 mm.
• Use a hose clamp if connecting to a fixed drain
(sink).
The connector is ready to cut to the desired
drain connection size. Only a clamp is required.
TOOLS
1) Flathead screwdriver
2) Open-ended spanner 16 mm
3) Tape measure
4) Spirit level
CABLE/HOSE LENGTHS
Drainage hose: 1930 mm
Supply hose: 1670 mm
Power cable: 1770 mm
Make sure the edges of the
cable hole are even so as not
to damage the drainage and
supply hoses and the electric
cable.
Cable hole
Min 823
Min 560
600
135-18
5
50
50-105
596
820-870
520
560
With nut and sliding protection mounted
Recommended measurements
**
*
*
**
* *
100-
150
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG va 6611 nt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG va 6611 nt in the language / languages: English as an attachment in your email.

The manual is 7,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG va 6611 nt

ATAG va 6611 nt Installation Guide - English, German - 1 pages

ATAG va 6611 nt Additional guide - Dutch - 1 pages

ATAG va 6611 nt Installation Guide - Dutch - 1 pages

ATAG va 6611 nt User Manual - Dutch - 52 pages

ATAG va 6611 nt Installation Guide - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info