127827
21
Zoom out
Zoom in
Previous page
1/48
Next page
21
Drain pump
The pump can be accessed from inside the
machine.
1. Cut the power to the machine by pulling out
the plug!
2. Remove the coarse filter and pipe section.
3. Remove the small fitted piece at the left of
the bottom drain (see the image below).
4. You can release and turn the pump blade by
inserting your finger into the hole and release
anything blocking it.
5. Reinstall the fitted piece and filters.
6. Plug the plug into the wall socket.
If the machine still does not start and a buzzing
sound is heard, the overflow guard has been
activated.
• Shut off the water.
• Pull the plug out from the wall socket.
• Call the service division.
NOTE!
Do not forget to reinstall the fitted piece.
The spray arms
Holes and bearings can sometimes become
blocked.
1. Pull the lower washer arm straight up to
release it.
2. Remove any deposits using a needle or simi-
lar.
The washer arms also have holes under neath.
Cleaning
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG va 6611 nt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG va 6611 nt in the language / languages: English as an attachment in your email.

The manual is 7,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG va 6611 nt

ATAG va 6611 nt Installation Guide - English, German - 1 pages

ATAG va 6611 nt Additional guide - Dutch - 1 pages

ATAG va 6611 nt Installation Guide - Dutch - 1 pages

ATAG va 6611 nt User Manual - Dutch - 52 pages

ATAG va 6611 nt Installation Guide - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info