71192
29
Zoom out
Zoom in
Previous page
1/48
Next page
29
Cleaning the spray arms
Regularly check the nozzles in the
three spray arms for blockages. If
necessary, clean the nozzles with a
piece of fine wire or a fine needle
and a strong water jet.
1 Do not damage the nozzle openings.
Top spray arm
1. Undo the fixing screw (A) by turning
anti-clockwise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing
screw.
4. Fasten the spray arm with the fixing
screw (A) turning clockwise.
Middle spray arm
1. Remove the middle spray arm by
turning it laterally.
The two-part spray arm bearing is
held together by a tension spring (B)
2. Clean spray arm nozzles.
3. To re-fit, press the middle spray arm
upwards until you feel it snap into
place.
Lower spray arm
1. Undo the fixing screw (C) by turning
anti-clockwise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing
screw.
4. Fasten the spray arm with the fixing
screw (C) turning clockwise.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG VA 5511 AT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA 5511 AT in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG VA 5511 AT

ATAG VA 5511 AT User Manual - German - 44 pages

ATAG VA 5511 AT User Manual - Dutch - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info