336557

ATAG ty 3011 m Manual

63
Zoom out
Zoom in
Previous page
1/70
Next page
INSTALLATION INSTRUCTIONS
Top-wood
GB 22
Change zero position knob
If you wish you may turn the control knobs 90° in relation to
the control box so that the zero position of the knob is set in the
right direction. Follow the steps as described below.
Ensur
e that the appliance is disconnected from the power
supply before you start.
Unscrew the cover of the control box and remove the cover
(A).
Carefully remove the print plates from their supports (B)
and unscrew the thermostat/switch combinations (D) by
loosening the screws (C).
Change the position of the thermostat/switch combination.
The figure shows a 90° turn to the right from position 1 to
position 2.
Ensure that you do not bend the capillary lead of the
thermostat.
1.
2.
3.
4.
control box cover
screw
thermostat/switch
control box
print plate
(A)
(D)
(C)
(B)
turn 90˚
position 1
position 2
INSTALLATION INSTRUCTIONS
Top-wood
GB 23
Order in which to build in the appliance
Turn the appliance upside down and place it on the
worktop. Remove the protective foil from the sealing tape
and apply the tape around the cut-out in the worktop. Start
at the rear side of the appliance and tape the sealing strip
along the corners. Make sure that the ends of the sealing
strip fit tightly together.
Measure the thickness of the worktop. Set the control box
to this thickness by correctly positioning the three screws
on the bottom of the control box. The sizes indicated
correspond to the thickness of the worktop.
1.
2.
10 mm
16 mm
20 mm
32 mm
40 mm
10 mm
16 mm
20 mm
32 mm
40 mm
10 mm
16 mm
20 mm
32 mm
40 mm
… 63 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ty 3011 m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ty 3011 m in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info