675719
23
Zoom out
Zoom in
Previous page
1/32
Next page
EN 23
Cleaning the Water Tank Filter
If the water tank filter is dirty, you can clean it under the tap.
1. Remove the suction tube with the filter.
2. Clean it out under the tap and put it back into position. Ensure that the filter touches the
base of the water tank.
Descaling
During the steam process, there can be an accumulation of mineral deposit in the steam system.
This needs to be removed from time to time. You need to carry out this task when the ‘Appliance
needs descaling’ notification is shown. If the appliance is not descaled after three notifications,
the steam functions will no longer be available. Use this function only when the oven has cooled
down fully. The descaling process comprises descaling and rinsing. Notifications with information
and requests for actions will be shown on the display during the process.
1. Pour water mixed with descaling agent into the water reservoir. Consult the descaling agent
instructions for the correct mixing ratio.
2. Open the ‘Settings’ menu.
3. Select ‘Cooking settings’.
4. Select ‘Settings’.
5. Select ‘Descaling’ to select the function.
6. Touch the confirm key to start descaling.
We advise using NOKALK/DLS for descaling. NOKALK/DLS is an extremely efficient
descaling agent based purely on natural, entirely biodegradable ingredients. The solution
is non-corrosive, not aggressive and is environmentally-friendly. As well as an effective
descaling action, it also has a cleansing and anti-bacterial effect, ensuring that the
appliance’s internal components are preserved in an optimum hygienic state. Therefore
food’s good taste is preserved and the appliance’s service life is extended.
Water is used for the steaming process. Water contains calcium and magnesium. Heat
causes the water to condense, leaving a mineral deposit (not harmful to humans).
If the descaling cycle is interrupted prior to the end of the cycle,
the program must be restarted from the beginning.
MAINTENANCE
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG SX4611C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG SX4611C in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG SX4611C

ATAG SX4611C User Manual - German - 32 pages

ATAG SX4611C User Manual - Dutch - 32 pages

ATAG SX4611C User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info