475427
19
Zoom out
Zoom in
Previous page
1/30
Next page
Remplissage du liquide de rincage
Le
liquide
de rincage est nécessaire,
afin qu'iI
ne
reste plus de
taches
d'eau
sur la vaisselle après le
lavage.
N'utiliser
que
du
liquide
de rincage
spécial pour lave-vaisselle domestique.
Ouvrir Ie couvercle du réservoir
de produit de rincage (Figure 0/24).
Remplir le produit de rincage jusqu'A
ce que
l'indicateur de remplissage de
couleur
claire
(figure 0/25) devienne complétement sombre.
Vous pouvez reconnaitre le
niveau
de
remplissage Ala
couleur
claire/sombre de la
surface. Ensuite revisser complétement le
couvercle.
Une
quantité moyenne
de
liquide
de
rincage sera automatiquement distribuée
à
chaque lavage.
Indication de remplissage
de
liquide
de rincage
Figure 0/25
Si l'indicateur de remplissage de
liquide
de rincage devient clair ou s'allume,
suivant l'équipement du lave-vaisselle,
ii
est nécessaire d'ajouter du
liquide
de
rincage.
Lorsque la réserve de
liquide
de rincage
est suffisante, l'indicateur paraft foncé
ou est éteint.
Doseur du Produit de rincage
Figure 0/26
Le doseur de distribution
peut être
réglé de 1 a 6.
Au depart de l'usine it est
regie
sur 3.
Ne changer la position du doseur de
distribution
que
s'il reste des trainees
ou des taches
d'eau
sur la vaisselle.
-
en
cas
de trainees,
mettre le doseur sur une
position inférieure.
-
en
cas
de taches
d'eau,
mettre le doseur sur une
position
superieure.
Unloading dishwasher
First unload the lower, then the upper rack.
This prevents drops of water
from possibly falling onto the full lower rack
when the upper is moved.
Dishes should be allowed to cool
for about 15 minutes after washing,
so they will be easier to touch.
Dishes will cool quicker
if the door is opened slightly.
Checking the machine
-
Check the coarse and fine filters
(Fig. ,1).
If food particles have remained,
remove filters and flush away particles
under running water.
When reinserting the filters,
see that the coarse and fine filters
(click-in plastic filters) fit evenly
into the depression.
-
Check the upper and lower spray arms
to see that the holes are free
of obstruction.
(Fig. 0/15 and 0/19)
Clean if necessary.
The lower spray arm is simply clicked
into place. It may be removed by pulling
up. After cleaning, the spray arm must
be clicked back into position (Fig.49/16).
The upper spray-arm is screwed on;
to remove, simply unscrew (Fig.
Service
Before you call the service engineer,
see if with the tips listed under:
- Self help -
you can see to the problem yourself.
Even during the guarantee period,
a full charge must be made for labour,
if there is not a fault with the appliance.
This appliance complies with standard safety
regulations for electrical appliances.
Repairs on electrical appliances should be
carried out by qualified persons only.
Improper repairs can cause considerable
danger to the user.
Should there ever be a problem,
call our service engineer.
Please give your machine number (1)
and the FD-number (2)
to the service center.
1
2
FD
These numbers can be found
by opening the door and looking
at the upper right-hand side of the frame.
32
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG S6N22A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG S6N22A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info