475427

ATAG S6N22A Manual

16
Zoom out
Zoom in
Previous page
1/30
Next page
Possible Cause
-
Right dial (Fig. 0/5) is still set on OFF.
-
Plug is not securely in socket.
-
A fuse is blown in the house.
-
Left dial not in starting position (Fig. 0/2).
-
Door not securely closed.
-
Water tap not on.
-
Filter clogged in inlet water hose.
-
Kink in drain hose.
-
Filter clogged.
(Check coarse and fine filters Fig.
e).
-
Programme is not completely finished.
-
Pull off and clean spray arm.
Clean also spray arm mounting.
-
Too little rinse-aid.
-
No regenerating-salt in the water-softener.
-
The lid of the regenerating-salt storage container
was not securely screwed on.
- Too much rinse-aid.
-
Too little rinse-aid.
-
Utensils not properly arranged.
-
Left dial turned past the start position (Fig. 0/2).
-
Incorrect amount of detergent or rinse-aid.
-
The left dial was turned 360 degrees after filling
detergent container. Detergent was therefore
released too soon.
-
Programme selector turned accidentelly after filling
detergent container.
This releases detergent too soon.
-
Utensils incorrectly arranged or rack overloaded.
-
Spray-arm rotation obstructed by utensils.
-
Coarse or fine filter clogged (Fig. ®).
-
Microfilter clogged, Fig. i).
(If needed remove and clean them.
Be sure the microfilter clicks securely back into place).
-
Filters not properly fitted into position.
-
Clogged nozzles in spray-arm.
-
Unsuitable programme selected.
Adoucissement
de
l'eau
Pour bien laver, le lave-vaisselle a
besoin
d'eau
douce. Pour
ce
faire il
posséde un adoucisseur incorporé.
S'il est bien réglé, it transforme ('eau
dure
en eau douce.
Réglage de l'adoucisseur
Avant la mise en service, il
faut
régler
le dispositif de regeneration à ('aide
de la
bande
-test jointe.
La
bande
test se trouve sur la feuille
Aqua-Test jointe.
Les services locaux de distribution des
eaux peuvent vous préciser
Ia
dureté de
votre eau.
Le réglage de l'adoucisseur s'effectue
selon la figure G.
Recommandation
importante!
Après le remplissage du
sel
régénérant,
veuillez vérifiez la bonne fermeture du
couvercle, afin d'éviter une infiltration de l'eau
de lavage.
Ne jamais
verser
du produit lessiviel
dans
le
bac a
sel, ce
qui détériore le bac de
regeneration (aucune prise sous
garantie).
Remplissage du
sel
régénérant
Figure
N'utiliser
que
du
sel
régénérant
spécial pour lave-vaisselle domestique!
Avant la mise en service
verser
environ
1 I
d'eau dans
le reservoir pour
sel
régénérant.
Pour le remplissage du
sel
régénérant,
tirer le panier à vaisselle inférieur,
dévisser le bouchon du réservoir à
sel
(figure 0/14) et
verser
le
sel.
Vous pouvez faciliter
('opération
de remplissage en utilisant un
récipient à bec verseur.
Revisser ensuite le bouchon à fond.
II est recommandé d'utiliser un
sel
régénérant a petits ou
gros
grains.
En
cas
d'utilisation de
sel
en morceaux,
ne
pas remplir complétement le réservoir.
Ne jamais employer de
sel
de table, de
sel
de cuisine, de
sel
marin, de
sel
a
bétail ou de
sel
de déneigement.
Ces
sels contiennent, la plupart du temps,
des composants insolubles susceptibles à
la longue de perturber le bon
fonctionnement de l'adoucisseur.
Le réservoir contient environ 2 kg. de
sel
régénérant.
Après le premier lavage, le réservoir
à
sel
est rempli
d'eau.
C'est pourquoi, le remplissage de
sel
toujours avoir lieu immédiatement
avant la mise en
marche
de l'appareil.
De cette fagon l'excédent de
sel
sera dilué et éliminé.
Indication de remplissage
de
sel
Figure 0/23
Dans
les régions a eau
dure,
remplir le réservoir de
sel
dès que
('indicateur
de remplissage n'est plus
visible.
(GB)
Self-help
Problem
Pilot lamp
doesn't turn off
Appliance doesn't
begin sequence
Machine stays
on pre-rinse cycle
Water not pumped away
Cleaner lid will not close
Lower spray arm
rotates with difficulty
White deposit
on dishware
Streaks on glassware
Utensils still wet
after drying
cycle
Rattling noises
Unsatisfactory
washing results.
26
31
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG S6N22A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG S6N22A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info