Manual ATAG OX9511HN (page 60 of 76) (English, German, Dutch, French)

692553

Zoom out

Zoom in

1/76

EN 6

USE

Operation

Setting the current time of day

When the oven is connected to the power network, ‘AUTO’ and the

figures on the timer will flash. Set the current time of day as follows:

1. Press in the ‘–’ and ‘+’ buttons simultaneously till you hear a beep.

A point(D) between the figures of the timer will start flashing.

2. Set the correct time of day using the ‘–’ and ‘+’ buttons.

You will hear a beep confirming the time selected. The ‘heat’ symbol

stays lit.

The time can be changed whenever you like; follow the instructions

above to do so.

Using the oven

The oven has 9 oven functions and 1 cleaning function. Consult the

table to select the right oven function to prepare a dish.

1. Place the dish in the oven.

For some dishes the oven has to be preheated first.

2. Turn the ‘oven function knob’ to the oven setting desired.

3. Set the oven to the desired temperature using the thermostat knob

(between 50-250 °C).

The oven will start the oven function set and heat the oven to the

temperature set. A check light will go on above the thermostat knob

and will go off once the temperature set is reached.

Remarks

• The temperature can be adjusted during preparation.

• If the oven is in use, operation of the hot air element and the top

and bottom elements will regularly be interrupted to regulate the

temperature.

Turning off the oven

• Turn the oven function knob and temperature knob to the o

position.

Please note! If the oven does not work, there may be a timer

function active. Cancel all timer functions by pressing the ‘-’ and ‘+’

buttons till ‘AUTO’ disappears from the display. Wait a few seconds

till the change is saved.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG OX9511HN in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG OX9511HN Manual

Product: