556910
187
Zoom out
Zoom in
Previous page
1/196
Next page
EN 41
CLEANING AND CARE
Stainless steel and Graphite black oven fronts
Do not use steel wool, scouring pads or other abrasives. They may
damage the finish.
Wipe the surface gently with a soft clean cloth or microfiber cloth
and a mild window cleaning detergent.
Accessories
Wash the accessories after every use and dry them with a kitchen
towel. If necessary, lay in warm soapy water for about 30 minutes
for easier cleaning.
Catalytic enamel surface (OX6411K)
The removable cover casing is coated with a dark gray catalytic enamel
that can become coated with oil and fat distributed by circulating
air during convection heating. These deposits will burn off at oven
temperatures of 200 °C and higher, for example, when baking or roasting.
Higher temperatures will result in faster burning.
The oven and accessories should be cleaned after each use.
Otherwise further baking and roasting will cause the deposits to bake
on even harder and cleaning may become difficult and in extreme
cases impossible.
Cleaning by hand
Make sure the oven is cool before cleaning
The catalytic enameled cover casing should be cleaned using a
solution of hot water and washing-up liquid applied with a soft
nylon brush.
Do not use abrasive cleaning products, hard brushes, scouring
pads or cloths, steel wool, knives or other abrasive materials. Do
not use oven spray on catalytic enamel as the chemicals used in
oven sprays will damage catalytic enamel and render it ineffective.
If using oven sprays on the interior oven surfaces, the catalytic
cover casing must first be removed from the oven.
Cleaning with high temperatures
Before cleaning the catalytic cover casing with high temperatures,
make sure that all interior oven surfaces have been cleaned
as described above. Otherwise, the high temperatures can
bake deposits onto the interior oven surfaces and make them
impossible to remove.
187


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG OX6492F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG OX6492F in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG OX6492F

ATAG OX6492F User Manual - Danish, Swedish, Norwegian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info