556946
65
Zoom out
Zoom in
Previous page
1/76
Next page
EN 11
1. Fix the oven on both sides using screws.
2. After installation, remove the vinyl
protective film from the door to the
appliance and the protective film from the
interior surfaces of the oven.
Connecting to the mains power supply
Electrical connections must be made as
per the connection plate fixed to the back
of the appliance by an electrical fitter who
must ensure that the appliance has been
connected up in accordance with fitting
instructions and local regulations.
Where the appliance is not connected to
the mains electricity supply by a plug, an
omni polar cutout device (with a contacts
gap of at least 3 mm) must be fitted on
the supply side of the connection to meet
safety requirements.
Note
When the power is connected, the electronics of the oven are
initialised; this neutralizes the lighting for a few seconds. The
electric cable (H05 RR-F or H05 VV-F, Min. 1.5 m, 1.5~2.5 mm²)
must be long enough for it to be connected to the built-in oven
standing on the floor in front of its unit.
Open the back cover of the oven at the bottom (using a flat-bladed
screwdriver) and completely unscrew the connection screw and
the cable clamp before fitting conducting wires into the appropriate
terminals.
The earth wire must be connected to the (
) terminal of the oven.
If the oven is connected to the power supply by a plug, this must
remain accessible once the oven has been fitted.
We cannot accept any liability in the event of an accident resulting
from non-existent or faulty earthing.
INSTALLATION AND CONNECTION
Live
Neutral
Earth
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG OX6411B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG OX6411B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info