556942
149
Zoom out
Zoom in
Previous page
1/185
Next page
EN 9
Spilled food containing sugar or fruit juices, such as prune juice or
rhubarb, can damage the colour of the enamel. It is advisable to
clean the oven immediately after it has cooled down.
Note: the water in the steam oven insert pan is still hot!
Heat and steam resistant baking tins should be used in the steam
oven. Silicone baking tins are not suitable when combining hot air
circulation and steam.
Do not use baking tins that have areas of rust. Even tiny patches
can lead to rust in the oven interior.
Installation
Check the appliance for transport damage. Do not connect a
damaged appliance.
This appliance should only be connected by a registered installer!
Faulty parts may only be replaced by original parts. The
manufacturer can only guarantee that original parts meet safety
requirements.
To avoid dangerous situations, a damaged connecting cable
should only be replaced by the manufacturer, the manufacturers
service organisation or suitably qualifi ed persons.
The electrical connection must comply with national and local
regulations.
The wall plug socket and plug should always be accessible.
If you want to make a fi xed connection, make sure that a omnipolar
switch with a contact separation of at least 3 mm is fi tted in the
supply cable.
The equipment should not be connected to the network via a multi-
plug socket or extension lead, as the safe use of the equipment
can then not be guaranteed.
WARNING: Never open the appliance casing. The casing may only
be opened by a service technician.
Disconnect the appliance from the mains supply before starting
any repair work.
If the safety instructions and warnings are not followed, the
manufacturer cannot be held responsible for any resulting damage.
If you decide to discontinue using the appliance because of a fault, we
recommend you cut o the cable after removing the plug from the plug
socket. Take the appliance to your municipality’s waste disposal site.
SAFETY (CONTINUED)
149


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG OX4492B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG OX4492B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info