70426

ATAG OX 9011 M Manual

45
Zoom out
Zoom in
Previous page
1/45
Next page
Building under
Building-in
min.
860
min.
550
475
895
480
546
472
20
843
16
36
450
min.
550
475
min.
60
860
450
895
546
472
480
20
843
16
36
50
GB 21GB 20
Technical specifications
fitting dimensions
Type of current: 230 V AC – 50 Hz – 3,5 kW
Dimensions (L x W x D): 895 x 480 x 546 mm
This appliance conplies with the applicable EC directives.
Building in
Building under
general
safety
This appliance may only be connected by a registered
installer.
This built-in oven has been designed for domestic use. Use it
only for the preparation of food.
electrical
connection
230 V AC – 50 Hz – 3,5 kW
You should always comply with national and local regulations
for the electrical connection. These stipulate, among other
things, that the appliance should be earthed.
The house mains to which the appliance is connected must
comply with the national and local regulations.
Connect the appliance to a wall socket which has been
installed in accordance with the regulations in force. The wall
socket and plug should be accessible at all times.
Warning: The appliance should always be earthed.
Wiring diagram: On the upper side of the appliance there is
a label with the wiring diagrams on it.
Attention: The connected load and the mains voltage
required are specified on the data plate.
The connection should be made in accordance with the
national and local regulations.
Fixed connection: If you wish to make a fixed connection, it
should be fitted with an multi-polar isolating switch with a
minimum contact separation of 3 mm.
Mains connection: Use a good quality connection cable for
the connection (for example, H 05 VV -F or equivalent.
Maintenance: When maintenance is carried out on it, the
oven should be disconnected from the power supply, either
by removing the plug from the socket or by removing the
fuse from the meter cupboard.
… 45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG OX 9011 M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG OX 9011 M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info