Manual ATAG ox 6011 m (page 32 of 33) (English, German, Dutch, French)

330690

Zoom out

Zoom in

1/33

GB 12 GB 13

faults

what should I do if…

fault

Oven or grill does not heat up.

Temperature is not correct.

Oven light not on.

cause

Fuse in the meter cupboard

defective.

Temperature set incorrectly.

Thermostat defective.

No power supply.

Bulb defective.

solution

Replace the fuse.

Set the oven temperature

again.

Switch oven off and phone the

service department.

Insert the plug in the socket.

Switch on the two-way and off

switch in the meter cupboard.

Switch oven off and replace the

bulb. Disconnect the appliance

from the power supply by

removing the plug from the

socket or by turning the two-

way and off switch in the meter

cupboard or by removing the

fuse. You can snap the glass

cover out of the side wall of the

oven. The bulb is then

accessible. Replace it with a

new bulb 230 V-50 Hz-

300 °C/25 W.

If the appliance does not work properly, this does not always mean that it is defective.

Try to deal with the problem yourself first. Phone the service department if the advice

given below does not help.

maintenance

cleaning

Use the enamelled baking tray as a drip-tray when grilling.

cleaning after use

For cleaning both the inside and the outside of the oven, it is

best to use a mild cleaning agent (washing-up liquid) and a

damp cloth. Dry with kitchen paper or a dry cloth.

Never use abrasive agents. These may harm the enamel or

cause scratches.

stubborn stains

You can remove stubborn stains with a liquid abrasive or oven

cleaner. Remove burnt-on food inside the oven with a glass

scraper.

The glass panel on the inside of the door is removable. If the

oven has been built in under the worktop, it may be that the

glass panel cannot be taken out of the door. You can clean

the window on the inside by sliding a cloth between the two

panes. The glass panel's guides on the inside of the oven

door may become discoloured if they come into contact with

oven cleaner. Read the directions on the packaging of the

oven cleaner before use.

cleaning accessories

Use a mild cleaning agent. Dry the accessory well with a dry

cloth. Any burnt-on food on the grill set can be removed

using steel wool.

grill reflector plate

The oven is equipped with a removable grill reflector plate.

When you want to clean the plate, you must pull it straight

towards you out of the oven.

When putting the grill reflector plate back, take care that the

two studs slot into the element.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ox 6011 m in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG ox 6011 m Manual

Product: