74652

ATAG OX 3011 C Manual

65
Zoom out
Zoom in
Previous page
1/66
Next page
GB 65
troubleshooting
what if…..
WHAT SHOULD YOU DO?
POSSIBLE CAUSES
- Change the bulb.
- Connect to power supply or change
fuse.
The lamp is unusable.
The oven isn't connected to the power sup-
ply or the fuse has blown.
IF YOU REALIZE THAT
The light inside the oven isn't
working.
The oven isn't heating
The oven isn't connected to the power
supply.
The fuse has blown.
The temperature selected is too low.
Other causes.
- Connect to power supply.
- Change the fuse, checking that it is
16A.
- Contact the After-Sales Service.
In all cases, if you are unable to solve the problem yourself, please contact the After-Sales Service
without delay.
The cooling fan keeps working
after the oven is turned off.
The fan should stop after no longer than
1 hour, as soon as the temperature of
the oven falls to approx. 125°C.
If it has not stopped after 1 hour
- Nothing.
- Contact the After-Sales Service.
The rotisserie spit motor keeps working
until the selector is returned to the zero
setting, or the door is opened, or 30 mi-
nutes after the end of the cooking
time.This program avoids the food bur-
ning once the oven has stopped four.
- Nothing.
The rotisserie spit keeps tur-
ning after the end of cooking
1.Cooking temperature too high
2. Dirty oven
1. Reduce the cooking temperature
2. Clean the oven by pyrolysis if this pro-
gram is available
Smoke is being produced du-
ring cooking
There's no light inside the oven
while the pyrolysis program is ope-
rating
The lighting is only meant to come on
for the cooking programs.
The pyrolysis cycle produces temperatures,
which are too high for the lighting to work pro-
perly.
There's a noise inside the oven
after the end of cooking
The fan in the upper part of the oven
(not visible) is working (even if the oven
is set to the "off" position).
This is normal; the fan of a pyrolysis
oven stays on until the oven has
cooled down.
The door isn't shut properly.
The clock time on the programmer is flas-
hing.
Other causes.
- Make sure the door is closed correctly
- Set the hour of the day before start-
ing up the pyrolysis
- Call the After-Sales Service
Pyrolysing doesn't start
The lock is not effective immediately
The door lock only becomes effective
approx. 2 minutes after the start of the
cycle..
If it hasn't locked after 5 minutes,
contact the After-Sales Service.
The door lock during pyrolysing
isn't
working.
… 65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG OX 3011 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG OX 3011 C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info