556947
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
1
3
5
2
4
1
2
3
1
23
1
2
3
CLOCK
Keep the door open while setting the Clock. This gives you 5 minutes
to complete the setting of the Clock. Otherwise, each step must be ac-
complished within 30 seconds.
1. Press the Clock button (3 seconds) until the left-hand digit (hours)  icker.
2. Press the +/- buttons to set the hours.
3. Press the Clock button again. (The two right hand digits (minutes)  icker).
4. Press the +/- buttons to set the minutes.
5. Press the Clock button again.
The Clock is set and in operation.
Note: When the appliance is  rst plugged in or after a power failure, the display is blank. If the clock is not set, the display will remain blank until
the cooking time is set.
TIMER
Use this function when you need a kitchen timer to measure exact
time for various purposes such as cooking eggs, pasta or letting the
dough rise before baking etc.
1. Press the +/- buttons to set the desired length of the timer.
2. Press the power button repeatedly to set the power to 0 W.
3. Press the Start button.
An acoustic signal will be heard when the timer has  nished to count down.
COOK & REHEAT WITH MICROWAVES
Use this function for normal cooking and reheating, such as vegeta-
bles,  sh, potatoes and meat.
1. Press the +/- buttons to set the time.
2. Press the power button repeatedly to set the power.
3. Press the Start button.
Once the cooking process has been started:
The time can easily be increased in 30-second steps by pressing the Start button. Each press increases the time with 30 seconds. You may also alter
the time by pressing the +/- buttons to increase or decrease the time.
Pressing the power button may also change the power level. The  rst press will show you the current power level. Press the power button repeat-
edly to change power level.
DEFROST
Use this function for defrosting Meat, Fish & Poultry ONLY. For other
foods such as Bread & Fruit you should follow the procedure for “How to
cook and reheat with microwaves and choose 160 W when defrosting.
Defrost should only be used if the net weight is between 100 - 2000g.
1. Press the Defrost button.
2. Press the + / - buttons to set the weight of the food.
3. Press the Start button.
Midway through the defrosting process the oven stops and prompts you to TURN” food.
— Open the door.
Turn the food.
— Close the door and restart (GO) by pressing the Start button.
Note: the oven continues automatically after 2 min if the food hasn’t been turned. The defrosting time will be longer in this case.
If the weight is lesser or greater than recommended weight:
Follow the procedure for “How to cook and reheat with microwaves” and choose 160 W when defrosting.
If the food is warmer than deep-freeze temperature (-18°C), choose lower weight of the food.
If the food is colder than deep-freeze temperature (-18°C), choose higher weight of the food.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG MA3511E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG MA3511E in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info