790809
7
Zoom out
Zoom in
Previous page
1/68
Next page
Hybrid electric water heater GENERAL INFORMATION
7
1 GENERAL INFORMATION
1.1 Description of the symbols used
In terms of installation and operation safety, the symbols described in the table below are used in order to stress the
importance of the relative risk warnings:
Symbol
Description
Failure to comply with this warning may result in injury to persons or, in some cases, death.
Failure to comply with this warning may result in serious damage to property and plants or injury to
animals.
It is mandatory to comply with the general and appliance-specific safety measures.
1.2 Field of application
This appliance is intended for hot water production for domestic use or similar, at temperatures below boiling point. The
appliance must be hydraulically connected to a domestic water supply line and to a power supply network. Exhaust
ducts may be used for the entry and discharge of processed air.
It is forbidden to use of the appliance for uses other than those specified. Any alternative use of the appliance constitutes
improper use and is prohibited; in particular, the appliance may not be used in industrial cycles and/or installed in
environments exposed to corrosive or explosive materials. The manufacturer shall not be held liable for any damage
due to faulty installation, improper use or uses deriving from behaviour that is are not reasonably predictable, and
incomplete or careless implementation of the instructions contained in this manual.
This appliance should not be operated by individuals (including children) with reduced physical or
sensory abilities, or by inexperienced or unskilled individuals, unless adequately supervised and trained
regarding use of the appliance by persons responsible for their own safety. Children must be
supervised by persons responsible for their safety so as to ensure that they do not use the appliance
as a toy.
1.3 Technical requirements and standards
Installation is the responsibility of the customer and must only be carried out by qualified personnel, in accordance with
applicable national legislation and any provisions issued by local and public health authorities, following the specific
manufacturer instructions provided in this manual.
It is the responsibility of the manufacturer to ensure the product complies with all relevant directives, laws and regulations
in force at the time the product is first placed on the market. Knowledge and compliance with the laws and technical
regulations inherent to the design, installation, operation and maintenance of the systems shall be the sole relative
responsibility of the designer, installer and end user. Any reference to laws, regulations or technical rules contained in
this manual is for information purposes only; the introduction of new provisions or modifications to existing laws will not
in any way binding on the manufacturer towards third parties. It is necessary to ensure that the power supply network
to which the product is connected complies with the EN 50 160 standard (otherwise the warranty will be void). For
France, ensure that installation complies with the NFC 15-100 standard.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG Lydos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG Lydos in the language / languages: English, Dutch as an attachment in your email.

The manual is 4.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info