692615
30
Zoom out
Zoom in
Previous page
1/36
Next page
EN 30
OTHER
Faults table
Problem Cause/Solution
Appliance is
connected to the
power supply but is
not working.
Check that the socket is live and that the appliance is switched on.
Appliance cools
continuously for a
long time.
The compressor is operating for a longer time at low capacity (low
energy consumption / high efficiency). This is the most efficient form
of operation. The following factors can also influence the appliance’s
operation:
The ambient temperature is too high.
The door has been opened for too long or too frequently.
The door is not closed properly.
The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
Too much fresh food has been put in at the same time.
Insufficient air circulation around the compressor and condenser.
Check that the ventilation around the appliance is sufficient (see
the separate installation instructions).
The sensor in the refrigerator is blocked by fresh food. Make sure
that air can circulate freely around the sensor (not applicable to all
models).
Excessive ice
formation in the
freezer.
The freezer compartment has not been defrosted periodically.
Defrost the freezer compartment to remove the ice.
The door is not closed properly.
The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
Condensation on
the glass shelf
above the drawers
in the refrigeration
compartment.
Open the humidity control slider.
Check that the door is closed properly and seals properly.
This is a temporary problem that cannot be avoided entirely in
periods of high ambient temperatures and high humidity. The
problem disappears when the temperature and humidity return to
normal levels. We recommend that you clean the drawers more
frequently and occasionally wipe off any drips.
Pack food in bags or other air-tight packaging.
Symbol D flashes: The door has been opened for too long or too frequently.
The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
Too much fresh food has been put in at the same time.
When you have any doubts about whether your appliance is working properly you should not
immediately assume that it is defective. We recommend that you should in any case check the
points in the following table.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KS25178B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KS25178B in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG KS25178B

ATAG KS25178B User Manual - German - 36 pages

ATAG KS25178B User Manual - Dutch - 36 pages

ATAG KS25178B User Manual - French - 36 pages

ATAG KS25178B Installation Guide - All languages - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info